MTU Engineers Zap and Unstick Underwater Smart Glue

Maria J. Danford

With a small zap of electricity, biomedical engineers at Michigan Technological University take an underwater smart glue prototype from sticky to not in seven seconds. Turning adhesion on and off is what makes a glue smart. It’s one thing to do this in the open air and quite another under […]

With a small zap of electricity, biomedical engineers at Michigan Technological University
take an underwater smart glue prototype from sticky to not in seven seconds.

Turning adhesion on and off is what makes a glue smart. It’s one thing to do this
in the open air and quite another under water. Inspired by nature, catechols are synthetic
compounds that mimic the wet-but-still-sticky proteins secreted by mussels and offer
promise for smart adhesives that work in water. The technology could help with underwater
glue, wound dressings, prosthetic attachments or even making car parts and in other
manufacturing.

Smart Glue: Adhesives that can be turned on and off. (highlight "Adhesive") Catechol mimics proteins secreted by mussels that are sticky underwater It's Electric: For the first time, engineers deactivated a catechol-containing adhesive using an electric current (highlight "deactivated") When switched off, catechol gets less sticky and turns bright red Biomed and Beyond: This smart glue could be used for bandages, underwater technology, car manufacturing, and more.
Biomedical engineers Bruce Lee and Saleh Akram Bhuiyan test catechol-containing adhesives
to make underwater smart glue.

 About the Researcher

 

man in lab coat

Saleh Akram Bhuiyan

Research Interests

 Saleh is working toward his PhD degree in biomedical engineering under the supervision
of Dr. Lee. He focuses on tuning the redox chemistry of catechol-based adhesive using
electrochemistry.

Bruce Lee, associate professor of biomedical engineering at Michigan Tech, is a part of the Office of Naval Research’s (ONR) Young Investigator
Program (YIP) and showed how to use pH to make smart underwater adhesives. Along with doctoral researcher Saleh Akram Bhuiyan, Lee developed a new method using
an electrical current to turn off the adhesion of a catechol-containing material.

The team’s findings came out in the Journal of the American Chemical Society and detailed the stickiest part of the process — creating a repeatable contact mechanics
test that can measure adhesion before and after a jolt of electricity.  

“A lot of people have been using catechol to mimic mussels and their adhesive proteins,
but applying electricity to deactivate it is new,” Lee said. “It’s more convenient
than using pH like what we were using before and it should be easier to integrate
with electronic devices, which means detaching could be automated and could be as
simple as pushing a button.” 

Catechols for Smart Glue

One day catechol adhesives may help attach equipment to the hulls of submarines but
testing prototypes in scuba gear isn’t how new tech gets created. Instead, Lee and
Bhuiyan need to control a suite of variables in a small lab space. Simple as it sounds,
running a current through a material and checking its stickiness is actually quite
difficult to do over and over again.

Bhuiyan developed a setup that uses a titanium sphere and a platinum wire electrode
to apply electrical stimulation to the adhesive that is in contact with the sphere
in the presence of salty water. This method makes it easy to control the voltage applied
through the wire, glue and sphere as well as how salty the water is around them. The
amount of time the current runs is also important. With more time, voltage and salt,
the more the catechol adhesives gets oxidized and the less adhesive it becomes. With
strong enough voltage, the glue detaches in only seven seconds.

“The novelty is application of the electricity and the short amount of time it takes
to detach,” Bhuiyan said. “What I find most unusual about the experiment is the color
change. It starts white and when I apply the electricity and the material is deactivated,
it oxidizes and turns a red color — and we really like to see that red color.”

 Grants and Funding

Office of Naval Research N00014-16-1-2463 and the National Institutes of Health R15GM104846

The next step in the research will be taking that red and trying to turn it back into
white. The hallmark of a smart glue is not only deactivating adhesion, but turning
it back on. Lee and doctoral graduate Ameya Narkar were able to accomplish this feat by playing with pH, which earned them the Bhakta Rath Research Award, and Bhuiyan hopes to apply the lessons from that research to using electrical current.

From painless bandages to underwater glue, from automotive gear to prosthetic limbs,
catechol-containing adhesives are versatile and promising materials.

two men in lab coats holding metal equipment
A titanium sphere and a thin platinum wire act as electrodes to deliver a jolt of
electricity to a catechol-containing adhesive.
A Michigan Tech team has used electricity for the first time to deactivate a catechol-containing
adhesive in salt water.

Michigan Technological University is a public research university, home to more than
7,000 students from 54 countries. Founded in 1885, the University offers more than
120 undergraduate and graduate degree programs in science and technology, engineering,
forestry, business and economics, health professions, humanities, mathematics, and
social sciences. Our campus in Michigan’s Upper Peninsula overlooks the Keweenaw Waterway
and is just a few miles from Lake Superior.

Next Post

Motorola One Mid Pops Up on Geekbench, 6GB of RAM and Octa-Core Qualcomm SoC Tipped

Earlier in February, we heard rumours about three new upcoming Motorola smartphones, and now, one of them has popped up on a Geekbench benchmark listing. The Motorola One Mid is supposed to another mid-range offering and is now listed on the benchmark website, as of March 9. The phone has […]

Subscribe US Now